Fling thing catapult lever arm

Magnepult

Our catapult will use an electromagnet to get the repulsive force and launch the water balloons.

Catapult-Magnepult

This is my groups catapult. We intend on using an electromagnet to propel the arm holding the water balloon.

catapult

This side view of our catapult displays the spring that is used to generate the energy to launch the water balloon.
Team Friendly Fire
By: Mary Claire Matlock

electromagnet

Team name is Magnetpolt

Catapult angle adjuster

On this catapult made by Team Get em Wet, the metal bar adjusts the angle at which the catapult arm will throw the water balloon, changing the distance and trajectory the balloon will take.

Catapult Launched Angle

The Longshots

The catapult is a design with a lock, adjustable arm, and base as well. can shoot up to 30 feet!

TrebuChamps Side View

This is the side view of my group's trebuchet

Location: Wood Shop (6th ETC)

By: Nicole Rocha

Catapult: Team Get 'Em Wet

Team: Get 'em Wet
Name: Sean Pollock
Location: ETC Woodshop
Description: Front View Bungee Cables

Longshot catapult

Team longshots. This is the unfinished extendable arm of the catapult.

Catapult

Torsion bundle Catapult by Team Optimus Prime. The photo displays the adjustable stopper of the catapult, which stops the lever arm when firing at different angles.

team gunner

frame being built.

Catapult

Team name: Longshots

This show the adjustable base of the catapult. The bottom left corner of the picture shows the lock mechanism of the catapult.

By Han-Yin Chang

Catapult

Perseus

Mouse Trap Catapult

Team Name: Team Mouse-apult
Our catapult uses potential elastic energy in 2 mouse traps and 2 bungie cords to launch the balloon.

Mouseapult, Launch Position

Catapult

Description: a catapult that uses the force generated by mouse traps to launch projectiles
Location: woodshop, 6th floor of mechanic engineering building
By: Anthony tran
Labels: catapult, lever, woodshop

Catapult

Aggie Eliminators

This is a 3/4 view of our catapult.

ETC Woodshop
by Sarah Kriegh

MUGS Catapult

This picture shows my team's overall catapult with the bungee cords properly positioned and ready to be fired.

Taken at 6th Floor Wood Shop at ETC
By Tristan Emborgo

Catapult

Showing the front of the catapult- Team Perseus

Bungee Cord

This is a bungee cord used for "THE FLING THINGS"

Sand-filled counterweight

Team Excelerate
Mitchell Johnson
The counterweight of the catapult, made out of a metal bucket filled with construction sand

How Things Twerk Catapult

This side view of the catapult shows how the horizontal bar is able to move down the diagonal supports resulting in a multiple different launch angles.

Location: ETC woodshop 6th floor
Date: 10/25/2013
Time: 11:30am
By: Trevor Maycan

Llama Del Rey Front Catapult View

This picture shows the telescoping catapult arm and torsion type propulsion of the mangonel style catapult.
Location: ETC building

catapult, lever arm

This picture shows a third class lever.
Team Friendly Fire
By Elizabeth Mays

Catapult lever arm

team name: how things twerk
This photo shows the making of the lever arm. The cup cradles the water balloon while the wooden arm launches it forward.

Lever Arm Mechinism

Binni's Berserkers - Lever Arm

Catapult from Team Top Shot

Our catapult from the side view. The pole can be put in different holes to adjust to launch angle.

2013-10-25 11:06AM
ETC Woodshop

Catapult for Team FriendlyFire

Front view of our catapult showing our crossbar and the extra holes we will use to adjust the launch angle.
Taken on Oct 24th, 6th Floor ETC Woodshop
By: Matthew Nelson

Vertical bar- MUGS

The fact that we put the vertical bars 2/3rds of the way down the base allows it to ideally distribute the weight and forces of the catapult.

Taken in the Woodshop etc

By Eric Valis 

TrebuChamps trebuchet in the folded position

Our trebuchet can collapse down in to a more condensed position to make out trebuchet more portable.

Location: ETC 6th floor woodshop

Date: 10/24/13

Time: 4:47

Catapult

Our preliminary catapult utilizes a strong and flexible band for launching
By Majd Alabandi, ETC Woodshop.
October 11, 2013.

Catapult lever arm

Projectile dysfunction

This is the lever arm of our catapult that launches our water balloon through the tension in bungee cords. It is made of PVC pipe and an insulator (to prevent the wood from bruising and breaking) and requires a decent amount if torque to operate

Team Get 'Em Wet Catapult

Front view of a catapult showing bungee cables.
Team: Get 'Em Wet
Name: Sean Pollock

The Skull Crushers Catapult

This picture shows the catapult docked and ready to launch (water balloon not shown). Twisted nylon cables are used as a torsional force for the arm.
Taken on 10/24/13 at 8:00P, ETC 6th floor
Emily Hood

Gunners Front View Catapult

This is the front view of our team catapult, without any bungee cords attached.
Team : Gunners
Nicolas Lavigne

Catapult

This is a photo of our catapult in the later stages of construction. The lever arm and surgical tubing has not been attached, but everything else is complete.

Team The Gunners, Catapult, Angled View.

This is photo of our catapult in an angled view without the bunjee cords, cup, and locking mechanism. It's set in one of different angles of shooting.

Top Shots Back/ Top

Catapult at rest (no bungees or balloon holder)
ETC woodshop on 6th floor
Clay Evon

Catapult, Springs

The catapult  operates by transforming the potential energy in the springs to kinetic energy in the catapult's arm.
Team: Perseus
Name : Ghaith Alghamdi

Catapult, springs

The catapult  operates by transforming the potential energy in the springs to kinetic energy in the catapult's arm.
Team: Perseus
Name : Ghaith Alghamdi

Llama Del Reys Back View

So this is the catapult.  You can see the fancy lever arm and scoop and rope stopper and all that jazz.  

Team EXCELerate's Catapult

Team EXCELerate : full view of the catapult without the holder for the balloon

The Skull Crusher Catapult

Title: The Skull Crusher is a torsion catapult. Location: ETC, 6th floor, woodshop by: Hareem Usmani
Taken at: 7:30 pm on 10/24/13

Team Get 'em Wet's Catapult

This is our team's catapult. Constructed completely out of wood and procrastination. Launching distance can be varied by adjusting the launch angle and bungee tension

Catapult - back power adjusters

  Team Projectile Dysfunction
This is the back end of the catapult that contains eye bolts and the ends of the bungee cords. The wing nuts can be easily tightened in order to stretch the bungee cords even further.

Catapult front view

This is the front view of our catapult. You can see the frame, pivot bar, lever, and crossbeam that make this catapult functional.
Photo taken at the UT woodshop on 10/24/13 by Justin Kim

Front view of the catapult

Well, I don't know what my team's name is, but this is our catapult. 

it is an elastic powered catapult built almost entirely out of wood. Both the tension in the bungee and the base are adjustable for different force and angle. 

Saul Carrillo

Alpha Dogs- Catapult Back

Here is our catapult. Taken in ETC wood shop. This picture shows the adjustability of the base of the lever arm within the main base.

Emmalie Berkovsky

Magnapults

This is our team's catapult. The launching mechanism will be an electromagnet.
Taken in the wood shop.
By Peter Norton

Skull crushers catapult

       

    By: Andrew Dismukes

    ETC Woodshop